3 Types of Wireless Technology

Wireless applications are flexible, clean and convenient. Wires can go bad or get tangled and will make an application difficult to trouble shoot if there is a communication problem. As systems boost in size, often wired applications surge in the amount of wires that may be problematic. Wireless solutions will help if you want to convey which has a tank out in a remote area, need to confirm the status of something from an online location, or once you don't need to install any wires. You can use long range wireless hardware to speak with remote tank systems or you can use the cellular network. Infrared technology can be utilized instead of wires in indoor applications.

Here is often a short list of 3 types of wireless technology:

Zigbee Wireless Technology operates in the 2 main.4 GHz frequency. It supports mesh, star and cluster tree topologies. It is an inexpensive, general purpose, self-organizing and robust. Zigbee networks require one host or master like ZB-2550-T to be the coordinator for the network that will initialize and see the most optimal transmission path between nodes. ZB-2550-T would bring RS-485 or RS-232 to Zigbee wireless communication. Zigbee networks could possibly have many slave routers like ZB-2551-T for transmitting and receiving with end devices. ZB-2551-T may bring RS-485 or RS-232 to Zigbee wireless communication. The typical communication distance for Zigbee hardware like ZB-2550-T and ZB-2551-T is 100 meters and also the standard antenna is omni-directional. Longer range versions can communicate as much as 700 meters. Directional antennas like ANT-15YG or omnidirectional antennas like ANT-15 may extend communication transmission up to 9 Km. Each Zigbee network has an RF channel, a PAN ID, every node features a unique node ID. Configuration of the network is performed by having a software utility. Zigbee networks support transparent, broadcast or Modbus communication modes.

Infrared Technology uses electromagnetic radiation. IR-210 is really a universal learning remote module that may learn around 176 IR commands and save the crooks to data. It operates in the 32 to 56 KHz frequency. IR-210 posseses an RS-232 port and an RS-485 port so that it can allow Modbus RTU based master devices to talk with IR slave devices like televisions, projectors, and lighting controls. IR-210 is to establish having a software utility which enables you to configure Baud Rate, Net ID, Device Name, and commands. The typical communication distance between your IR-210 and end devices like digital picture frames is as much as 7 meters.

Radio Frequency Technology may operate in the 900 Mhz frequency. It supports examine point or multi-point topologies. SST-900 by way of example has 16 adjustable RF channels and different AP modes like Slave/P2P and Slave/Broadcast. Radio Frequency Technology supports peer to peer or broadcast communication modes. SST-900's RF network is configurable having a software utility which enables you to configure an RF channel, group ID, AP mode, data format and baud rate. SST-900 posseses an internal self-tuner as well as typical wireless transmission range is 1000 meters.

For additional information, go to