Common Problems With Wireless Routers

The internet is really important and well built-into people's lives that going without it can be unthinkable. This is why wireless router problems are one of the most frustrating computer problems around. This article discusses many of the more widespread wireless problems and will allow you to get installed and operating as quickly as possible

Do I need a particular code in order to connect my wireless router to some Time Warner modem?

Not whatsoever. There is no special "code" that I'm aware of. All modern cable modems are plug and play (PnP) completely from the therapy lamp and developed to help all modern broadband routers. You'll probably ought to tweak a couple of settings on your router for optimal performance but that should be it.

How do I reset my router?

The best method is always to hold down the reset button for 15 seconds with all the power on, that ought to cause all of the lights to flash thus indicating a reset. Sometimes this button is actually small so you might to train on a sharp pencil.

Can routers lead to further problems which has a digital TV antenna?

Digital TVs and WiFi bands are on completely different bands (~450MHz - 650MHz) vs (2.4GHz or 5.0GHz for WiFi) so they should not restrict one and also other. That said, if the wireless router is towards the TV antenna that could overload the digital TV and cause your TV reception to look all fuzzy. To be sure, move them 10 feet apart this will sort the problem.

In my wireless router settings I have a noise (dB) rating. What is this when can it be a problem?

This refers back to the volume of interference when your wireless signal is transmitted from the router for your computer. The lower this figure is the better. Ideally, all noise levels needs to be 0dB but that is never going to happen. A router can broadcast an indication with up 70dB of noise whilst still being perform without a problem.

Noise could be causes by electromagnetic fields in close proximity to the router. One way of lowering this is to disconnect all of the ringer wires from a telephone sockets, smashing the electromagnetic field they generate. Modem telephones don't' require ringer line to be connected to ring which means this won't modify the phone whatsoever.