How to Install a Wi-Fi Connection Like the Professionals

Wi-Fi or wireless networking has improved operational efficiency and productivity in several industry verticals. The technology has enabled visitors to access the Web from virtually anywhere whether indoors or outdoors.

This article provides instructions on the way to setup a Wi-Fi connection indoors using some easy steps.

The Hardware

The first thing to look out for is the hardware. You will need a

• broadband Internet connection

• cable or DSL modem

• wireless router

• wireless network adapter

• network cables

• computer that supports Wi-Fi

Choose equipment which offers maximum compatibility thereby avoiding unnecessary expenses later; devices manufactured through the same vendor are often simple to install.

The router may be the core section of the Wi-Fi installation process. With a wireless router will come your way the Internet from the inside a fixed array of distance by using a desktop PC, laptop, PDA or cell phone. The range for Wi-Fi is all about 100 feet indoors or over to 300 feet outdoors

The router's function is usually to convert and broadcast the incoming signals from the modem. The broadcasted signals are acquired by wireless devices just like the network adapter coupled to the computer using an Ethernet switch/ USB port.

The wireless network adapter maintains outcomes of your personal computer as well as the router. Today computers can be found with in-built adapters. However if you own an older PC lacking an inbuilt one, a USB adapter is usually recommended for the Laptop computer while a PC card-based network adapter is much more suited to Desktops.

The Installation

The alternative is to connect the various hardware components.

1. To connect the router towards the modem, attach the cables towards the router ports according for the labels. The labels may be different according for the logo and you may have to refer the documentation deliver to assistance.

2. If your modem is already connected towards the computer, unplug the cable in the back of the processor and plug it into the router port called WAN. If not then just connect the modem cable into the router port and commence the alternative of configuring the router.

3. Attach a network cable from your router's LAN port located next for the WAN, and plug the cable to the computer's Ethernet port.

4. Ensure the modem is connected towards the Internet indicated by an environmentally friendly light about the modem hardware. Then fire up the router to your power source and switch it on.

5. The WAN light located next for the power display should illuminate indicating how the router has successfully connected for the modem.

The Configuration

1. To configure the router open a browser window and type within the router's IP address.

2. For a Linksys or 3Com router the address is 192.168.1.1 while for Netgear the address is 192.168.0.1. You will be prompted to penetrate an individual name as "admin" followed with the password.

3. The configuration page arrive up with the settings at default mode. Most configurations calls for making only three changes.

4. Change the default SSID and enter a unique wireless network name to distinguish your network.

5. The next step is essential that of enabling wireless encryption (WEP) which may protect your network from unauthorized access. Enter a "pass phrase" which will be used by your router to generate keys uniquely for your settings.

6. Then enter your individual password ideally engineered to be a mix of letters, numbers and symbols.

7. Save the alterations you've made and exit the page. Then disconnect the network cable attached from your computer to the router and connect the adapter rolling around in its place.

8. Your computer will detect the wireless network and prompt you through another few steps of selecting the Wi-Fi network.

You are good to surf the Web, browse your selected sites, print documents, send and receive mails, share media files by way of a public folder or play games using your friends.