Setup Wireless Network Using Router

Most of the laptops, mobiles, game consoles, printers feature capacity to hook up with wireless network these days. Wireless network enable you to share files, printers, gaming, online and for a great many other things. It provides mobility supplying you with the freedom of working from anywhere inside the range of access point. Installation can be easily and eliminates the requirement to pull cable through walls and ceilings. For your old machines you can find wireless USB adapter to be able to connect with wireless networks. Let's see ways to setup wireless network to get into internet .

Requirements:-

a)A broadband (DSL or cable) Internet connection - This internet will likely be shared by all the

connected devices.

b)A wireless router- The router converts the signals sounding your Internet connection into a

wireless broadcast.

c)A computer with wireless network adaptor.

Steps:-

a)Turn off your modem and connect the network cable (RJ-45) from modem to router.

b)Turn the modem on. After it connects to the internet, switch on the internet or WLAN

light should glow about the router. If every item has worked in accordance with plan till right now that

means the router is currently attached to modem.

c)Through a network cable connect your router to your computer (you need to use the main one which

connected router to modem temporarily if you don't have second one).

d)Now we will probably be configuring router settings. Check the documentation that was included with router for ip

address, account. Open web browser, enter in the ip address when promted

enter password. Leaving all settings to default configure below mentioned things:-

1)SSID-Identifies your network and yes it appears in a list of available wireless

networks.Change it to your unique name in order to avoid clash of names of various networks.

2)Administrative Password- Controls your network. Will be used if you need to change

your routers setting. Make it strong.

3)Wi-Fi Protected Access -Secures your network by generating a security key, which turns

on encryption. Only devices with this particular key can see the information flowing in the

network.

4)Save the settings.

5)Disconnect your computer from router(connect modem to router if you were using that

cable).

e)Now that you have established wireless network and configured router you should be able to

connect any wireless device to this particular network.

Everything is completed. Enjoy fast and seamless connection to your laptop, smartphone, Xbox, T.V or anything that you can create wireless.

If you havn't read "How to put together wireless network without router" i quickly would strongly suggest that you make out the print next or if you want to connect your iPhone to computer then you should check this article